# Mapillary indoor? **URL:** \ **Category:** Uncategorized\ **Created:** [April 17, 2016, 4:43pm UTC](https://forum.mapillary.com/t/mapillary-indoor/435 "2016-04-17T16:43:39Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![mircozorzo](https://avatars.discourse-cdn.com/v4/letter/m/43a26b/32.png) [@mircozorzo](https://forum.mapillary.com/u/mircozorzo)\ **Post date:** [April 17, 2016, 4:43pm UTC](https://forum.mapillary.com/t/mapillary-indoor/435/1 "2016-04-17T16:43:39Z")
Hi, is it possible to use Mapillary in indoor where there isn’t gps signal? ---
**Author:** ![filipc](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.mapillary.com/filipc/32/1103_2.png) [@filipc](https://forum.mapillary.com/u/filipc)\ **Post date:** [April 18, 2016, 7:48am UTC](https://forum.mapillary.com/t/mapillary-indoor/435/2 "2016-04-18T07:48:08Z")
Yes, you can add the exif gps tag afterwards in Geosetter and do an manual upload. ---
**Author:** ![mircozorzo](https://avatars.discourse-cdn.com/v4/letter/m/43a26b/32.png) [@mircozorzo](https://forum.mapillary.com/u/mircozorzo)\ **Post date:** [April 18, 2016, 9:21am UTC](https://forum.mapillary.com/t/mapillary-indoor/435/3 "2016-04-18T09:21:47Z")
Hi, thank you for the reply, only a question: I’ve to set the exit gps tags for only a photo or for all of a same sequence? In other words, if I set the right gps coordinate for a photo in example for the first, after that all the other 1000 photos of that sequence will be in the right place on the map? Bye, Mirco ---
**Author:** ![Amiga4000](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.mapillary.com/amiga4000/32/68224_2.png) [@Amiga4000](https://forum.mapillary.com/u/Amiga4000)\ **Post date:** [April 19, 2016, 7:26am UTC](https://forum.mapillary.com/t/mapillary-indoor/435/4 "2016-04-19T07:26:33Z")
Moin you need to set the EXIF for each photo, Mapillary takes the exif from each foto to place it in the map. echelon ---
**Author:** ![mircozorzo](https://avatars.discourse-cdn.com/v4/letter/m/43a26b/32.png) [@mircozorzo](https://forum.mapillary.com/u/mircozorzo)\ **Post date:** [April 20, 2016, 7:52am UTC](https://forum.mapillary.com/t/mapillary-indoor/435/5 "2016-04-20T07:52:14Z")
Thank you. Not a good way for a hundred of photo. Bye, Mirco ---
**Author:** ![Harry](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.mapillary.com/harry/32/82_2.png) [@Harry](https://forum.mapillary.com/u/Harry)\ **Post date:** [April 20, 2016, 8:08am UTC](https://forum.mapillary.com/t/mapillary-indoor/435/6 "2016-04-20T08:08:24Z")
not necessarily 😄 Just take a look att the Geosetter website [http://www.geosetter.de/en/](http://www.geosetter.de/en/) It is a free program that can add location to the EXIF info. Or you can combine it with a gpx file (if you could build a gpx file with a few points and let the program interpolate between the points) or you can move the photos on a map untill you are satisfied ---
**Author:** ![Amiga4000](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.mapillary.com/amiga4000/32/68224_2.png) [@Amiga4000](https://forum.mapillary.com/u/Amiga4000)\ **Post date:** [April 20, 2016, 8:25am UTC](https://forum.mapillary.com/t/mapillary-indoor/435/7 "2016-04-20T08:25:38Z")
Hi! we here at work do have the same issue currently: usually the OpenSFM does have the function to register the picture relative to each others, it just needs a anchor iamge and a scale factor, and the positions of all other pictures in the sequence are set. But it is not yet done… echelon ---
**Author:** ![mircozorzo](https://avatars.discourse-cdn.com/v4/letter/m/43a26b/32.png) [@mircozorzo](https://forum.mapillary.com/u/mircozorzo)\ **Post date:** [April 20, 2016, 8:37am UTC](https://forum.mapillary.com/t/mapillary-indoor/435/8 "2016-04-20T08:37:51Z")
Yeesss! Simply perfectly what i need! Nice job. Thank you. I stay tuned. Mirco