# Are uploads working okay? **URL:** \ **Category:** Command line tools\ **Created:** [March 5, 2026, 5:27am UTC](https://forum.mapillary.com/t/are-uploads-working-okay/10249 "2026-03-05T05:27:58Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![bob3bob3](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.mapillary.com/bob3bob3/32/68393_2.png) [@bob3bob3](https://forum.mapillary.com/u/bob3bob3)\ **Post date:** [March 5, 2026, 5:27am UTC](https://forum.mapillary.com/t/are-uploads-working-okay/10249/1 "2026-03-05T05:27:58Z")
3-4 days ago I used the tools (0.14.7) to upload about half of a 30GByte 43,000 image set, but there hasn’t been any in progress visible on the usual GUI interface. This is a new camera experiment, but I don’t see anything wrong with the EXIF. I only just completed my other three usual camera sets a day before. Before I raise this with support I wanted to check that those using the command line tool were having no problems. Like I mentioned, NOTHING has appeared on the GUI despite a successful debug log. The only real difference is that the camera angle is 200 degrees, pointing straight back from the vehicle and a little left. ---
**Author:** ![asturksever](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.mapillary.com/asturksever/32/72007_2.png) [@asturksever](https://forum.mapillary.com/u/asturksever)\ **Post date:** [March 5, 2026, 2:22pm UTC](https://forum.mapillary.com/t/are-uploads-working-okay/10249/2 "2026-03-05T14:22:31Z")
Thanks for reporting this @bob3bob3, I can see some sequences from 28th of February onwards on your feed. It looks like they should be published by now 🙂 ---
**Author:** ![balys](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.mapillary.com/balys/32/72313_2.png) [@balys](https://forum.mapillary.com/u/balys)\ **Post date:** [March 5, 2026, 4:19pm UTC](https://forum.mapillary.com/t/are-uploads-working-okay/10249/3 "2026-03-05T16:19:37Z")
Confirming, I checked a couple of latest uploads and everything looks in order, please let us know if you still have issues. Kind regards, Balys ---
**Author:** ![bob3bob3](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.mapillary.com/bob3bob3/32/68393_2.png) [@bob3bob3](https://forum.mapillary.com/u/bob3bob3)\ **Post date:** [March 5, 2026, 10:16pm UTC](https://forum.mapillary.com/t/are-uploads-working-okay/10249/4 "2026-03-05T22:16:52Z")
@asturksever @balys The ones you are seeing are likely the other (non test) cameras. They have appeared okay on the GUI. I have made a few passes at this, the last line of the logs looks quite good; 21:00:09.415 - DEBUG - HTTP POST [https://graph.mapillary.com/finish\_upload](https://graph.mapillary.com/finish_upload) JSON={“file\_handle”: “3:dXVpZF9iNzFiN2Y2OWViMGE0OTVmYWIxZWJhZjFkMjVhMmM3ZC5qc29u::ARZO5Qn9NeS4ohky\_tu14TUtQ\_s03KOL-t-sTYpxQjRcmuEQR7EVIv6aAdVW4GMPcW44wI\_nqMBX0h7vN0cSgHn\_ukNTOwgYoDVPxpo9DpU82Q:e:1772791209:ARZ7PM6MlI37Crn1YYo”, “file\_type”: "mly\_bundle\_manifest…(2 chars truncated) TIMEOUT=60 21:00:11.092 - DEBUG - HTTP 200 OK (1676 ms): {“cluster\_id”: “885077947698598”} 21:00:11.098 - DEBUG - Writing upload history: /home/b/.local/share/mapillary\_tools/upload\_history/48/17666a5f80bb60342db3c36705203a.json 21:00:12.276 - INFO - ==\> Upload summary 21:00:12.276 - INFO - 14 sequences uploaded 21:00:12.283 - INFO - 7.1 GB read in total 21:00:12.283 - INFO - 7.1 GB uploaded 21:00:12.283 - INFO - 2812.478 seconds upload time There were no ERRORS and only 2 WARNS associated with a duplicate (distance) image. Nothing untoward, so I was just waiting for them to appear on the GUI Nothing unusual in the bash processing script; CURRDATENT=20260228NT /home/b/Thing/Mapillary/lapp600/mapillary\_tools-0.14.7-linux-x86\_64 --verbose process “/mybook/mupload/$CURRDATENT” –offset\_angle 200 –overwrite\_all\_EXIF\_tags –device\_make RESPONSE –device\_model QV3878 –duplicate\_angle 90 –duplicate\_distance 0.25 –cutoff\_distance 50 –cutoff\_time 180 –geotag\_source exif 2\>&1 | tee -a /mybook/mupload/$CURRDATENT-proc-upload-lapp600-wx.log /home/b/Thing/Mapillary/lapp600/mapillary\_tools-0.14.7-linux-x86\_64 --verbose upload “/mybook/mupload/$CURRDATENT” –user\_name bob3bob3 2\>&1 | tee -a /mybook/mupload/$CURRDATENT-proc-upload-lapp600-wx.log I did however deliberately kill and restart the upload job 3-4 times. Special because I extracted only key frames and the source had good date/time, but wrong Lat/Lon (firmware?), so I used my other GPS unit. The source was also progressive/interlaced, so had to use -vf “select=eq(pict\_type,I),yadif” on the ffmpeg line. All geotagging etc was done with exiftool. The result was a 3FPS stream which is about right for country roads. To me they have appeared to vanish.. I assume that process in progress still appear at the top of the list? The above upload was for images 1-2 days before current so would eventually be laborious to scroll too, but I was checking every few hours. No green tracks as yet. Cheers ---
**Author:** ![caglarpmeta](https://avatars.discourse-cdn.com/v4/letter/c/848f3c/32.png) [@caglarpmeta](https://forum.mapillary.com/u/caglarpmeta)\ **Post date:** [March 6, 2026, 7:57am UTC](https://forum.mapillary.com/t/are-uploads-working-okay/10249/5 "2026-03-06T07:57:56Z")
We see 58.5 thousand images uploaded on Feb 28th and another 10 thousand on March 1st. Are these the entirety of the uploads ? Are you able to see those on the Mapillary web ? ---
**Author:** ![nikola](https://avatars.discourse-cdn.com/v4/letter/n/a88e57/32.png) [@nikola](https://forum.mapillary.com/u/nikola)\ **Post date:** [March 6, 2026, 9:30am UTC](https://forum.mapillary.com/t/are-uploads-working-okay/10249/6 "2026-03-06T09:30:11Z")
Based on the cluster\_id from the logs, here’s that upload on [mapillary.com](http://mapillary.com): [https://www.mapillary.com/app/?pKey=1219366853701959](https://www.mapillary.com/app/?pKey=1219366853701959) ---
**Author:** ![bob3bob3](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.mapillary.com/bob3bob3/32/68393_2.png) [@bob3bob3](https://forum.mapillary.com/u/bob3bob3)\ **Post date:** [March 6, 2026, 10:45am UTC](https://forum.mapillary.com/t/are-uploads-working-okay/10249/7 "2026-03-06T10:45:39Z")
Okay so the earlier take of the day is now appearing on the GUI, good news. I have however found a red flag fail on the sequence scroll, timed 28Feb 1:47PM. It’s easier to find them now as they are often \>800 images per sequence. Strange I didn’t see them before. I’ll continue the upload and see if the Failed sequence gets “replaced” Tnx much ---
**Author:** ![caglarpmeta](https://avatars.discourse-cdn.com/v4/letter/c/848f3c/32.png) [@caglarpmeta](https://forum.mapillary.com/u/caglarpmeta)\ **Post date:** [March 9, 2026, 9:38am UTC](https://forum.mapillary.com/t/are-uploads-working-okay/10249/8 "2026-03-09T09:38:34Z")
Thank you for checking the uploads. would you mind trying to upload the failed one again ? We were not able to understand the exact cause of the failure. ---
**Author:** ![bob3bob3](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.mapillary.com/bob3bob3/32/68393_2.png) [@bob3bob3](https://forum.mapillary.com/u/bob3bob3)\ **Post date:** [March 9, 2026, 10:18am UTC](https://forum.mapillary.com/t/are-uploads-working-okay/10249/9 "2026-03-09T10:18:11Z")
The failed one has been “replaced” by the upload of the balance of the days take. Interestingly the date/time of the failed sequence was more to the centre of the sequence than (I assume) the start. Scrolling through the 28th Feb sequences at those with \>800 images one can see the 5 minute spacing of the successful one and the failed one interleaved with them. ie the upload now appears to be successfully complete. As for why they were not visible for a while. It might be worth a mention that I had to re-authenticate (the tools and GUI)) during all this and there was a strange temporary account/auth error with FB services in general. Lets call the issue closed. I hope to do some large uploads during this week so will see if it works okay. Cheers ---
**Author:** ![caglarpmeta](https://avatars.discourse-cdn.com/v4/letter/c/848f3c/32.png) [@caglarpmeta](https://forum.mapillary.com/u/caglarpmeta)\ **Post date:** [March 9, 2026, 11:30am UTC](https://forum.mapillary.com/t/are-uploads-working-okay/10249/10 "2026-03-09T11:30:21Z")
Thank you for the quick replies. Please let us know if you encounter such issues again.